Grace Industries, Inc.
6
Pressing the MENU/PWR button navigates away from the Sound page.
Resetting the device exits out of Setup Mode and returns the SuperCELL® to
the home page.
When Sound is enabled, the Sound Icon appears solid; when Sound
is disabled, the Sound Icon appears empty.
Setup Mode Page 10 - Location Change Chirp
The Location Change Chirp page (displayed as Loc.Change Chirp)
allows the enabling or disabling of the audio chirp emitted from the
SuperCELL® whenever the device receives a new location transmission.
To enable or disable Location Change Chirp
, proceed to the Loc.
Change Chirp page by pressing the MENU/PWR button. At the Loc.
Change Chirp page, the SEL/PWR button enables/disables the audio tones
emitted from the SuperCELL® when the device receives a new location
transmission.
Pressing the MENU/PWR button navigates away from the Loc.Change
Chirp page. Resetting the device exits out of Setup Mode and returns the
SuperCELL® to the home page.
Setup Mode Page 11 - Alarm Button Sound
The Alarm Button Sound page enables/disables the alarm audio tone
emitted from the SuperCELL® when the Alarm Button is pressed.
NOTE
: If the master Sound control is disabled (Setup Mode Page 9 -
Sound), the SuperCELL® will not emit an alarm audio tone, even if the
Alarm Button Sound is enabled.
To enable or disable Alarm Button Sound
, proceed to the Alarm
Button Sound page by pressing the MENU/PWR button. On the Alarm
Button Sound page, the SEL/PWR button enables or disables the audio
tones emitted from the SuperCELL® device.
Pressing the MENU/PWR button navigates away from the Alarm Button
Sound page. Resetting the device exits out of Setup Mode and returns the
SuperCELL® to the home page.
Setup Mode Page 12 - Constant Alarm Vibration
The Constant Alarm Vibration page (displayed as AlarmVibConstant)
allows the vibration notifi cation emitted from the SuperCELL® device
to be toggled between a single burst or a continuous series of bursts.
To enable or disable Constant Alarm Vibration
, proceed to the Alarm-
VibConstant page by pressing the MENU/PWR button. At the AlarmVib-
Constant page, the SEL/PWR button enables or disables the Constant
Alarm Vibration setting.
Pressing the MENU/PWR button navigates away from the AlarmVibConstant
page. Resetting the device exits out of Setup Mode and returns the SuperCELL®
to the home page.
Setup Mode Page 13 - Backlight
The Backlight page allows the SC500 display Backlight to be enabled
or disabled.
To enable or disable the Backlight
, proceed to the Backlight page by
pressing the MENU/PWR button. On the Backlight page, the SEL/PWR
button enables or disables the SuperCELL® device display Backlight.
Pressing the MENU/PWR button navigates away from the Backlight page.
Resetting the device exits out of Setup Mode and returns the SuperCELL® to
the home page.
Setup Mode Page 14 - Auto ON/Off
The Auto ON/OFF page allows the Auto ON/OFF function to be
enabled or disabled.
To enable or disable the Auto ON/OFF function
, proceed to the Auto
ON/OFF page by pressing the MENU/PWR button. At the Auto ON/OFF
page, the SEL/PWR button enables or disables the Auto ON/OFF function.
Pressing the MENU/PWR button navigates away from the Auto ON/Off
page. Resetting the device exits out of Setup Mode and returns the Super-
CELL® to the home page.
With the
Auto ON/OFF function
disabled
, the SuperCELL® is turned on
and off by simultaneously pressing and holding the MENU/PWR and the
SEL/PWR buttons.
With
Auto ON/OFF function
enabled
, the SuperCELL® is turned on and
off by removing or inserting the device into the Charging Base
. Simul-
taneously pressing the MENU/PWR and the SEL/PWR buttons cannot turn
the SuperCELL® on and off with the Charger Auto Off function enabled.
Setup Mode Page 15 - Alarm Inhibit Timer
The Inhibit Timer page allows the Alarm Inhibit Timer to be enabled
or disabled.
The SuperCELL® is shipped with the Alarm Inhibit Timer enabled
.
To enable or disable the Alarm Inhibit Timer
, proceed to the Inhibit
Timer page by pressing the MENU/PWR button. At the Inhibit Timer page,
the SEL/PWR button enables or disables the Alarm Inhibit Timer function.
NOTE
: With the Alarm inhibit Timer enabled, the SuperCELL® will not
respond to the same alarm message for 30 seconds after that alarm
message has been acknowledged. This allows the user of the Super-
CELL® time to operate the menu system of the device during an alarm
event.
Pressing the MENU/PWR button navigates away from the Inhibit Timer
page. Resetting the device exits out of Setup Mode and returns the Super-
CELL® to the home page.
When the Alarm Inhibit Timer is enabled
and no alarm messages
have been received and acknowledged within the 30 second inhibit time,
the Alarm Inhibit Timer Icon will be displayed as solid on the Icon Line
of the SuperCELL® display. If an alarm message HAS been received and
acknowledged, the Alarm Inhibit Timer Icon will be displayed as empty.
This indicates that the device will not respond to an alarm that had been
acknowledged until the 30 second Alarm Inhibit Timer expires.
Setup Mode Page 16 - Enable GPS
Use the SEL/PWR button to enable or disable the GPS.
End of Setup Mode Screens
