1
2
5
3
4
5
E
Turn the vehicle body downside up.
1. Remove the screw, plastic washers and the nuts from the rear shock absorbers with two hex
wrenches.
2. Slide a plastic washer onto the screw.
3. Line up the holes on the rear axle frame with the holes on the rear shock absorber, and
reinsert the screw,
4. Slide a plastic washer onto the opposite end of the screw.
5. Fasten the nut with the hex wrench.
Repeat for the other side.
Attach the Rear Shock Absorbers
Rear bottom view
Rear bottom view
Rear axle frame
Tools required: Hex wrench x2