1
2
2
3
4
5
6
7
6
E
Attach the Driving Wheels
Cut off the plastic ties on the rear axle frames with a scissors. Release the gear boxes, but DO
NOT disconnect the connectors of the gear boxes.
1. Insert the rear axle into holes on the rear axle frames.
2. Slide a
Φ
12 washer onto the rear axle.
3. Slide the gear box onto the rear axle.
4. Slide the wheel onto the rear axle. ensure the wheel match up with the gear box.
5. Slide another
Φ
12 washer onto the rear axle.
6. Tighten a lock nut to the end of the rear axle with a spanner.
Repeat the above procedure to assemble the other rear wheel to the rear axle.
HINT: An extra spanner has been provided to hold the Lock Nut on the other side of the
rear axle while tightening the Lock Nut on the other side.
7. Insert the tabs on the wheel cover into the slots on the wheel.
Rear axle frame
Rear axle frame
Rear bottom view