Page 9 of 16
Form 0130M 03/29/07
Superchips Inc
.
Superchips Inc.
1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Some basic rules are implemented by the MAX MicroTuner for Shift Point options:
•
If the Shift Point is raised, the Down-Shift point remains at the STOCK or
Superchips
Performance Program
setting.
•
If the Shift Point is lowered both the Up-Shift and Down-Shift settings are lowered
proportionally.
•
The WOT (Wide Open Throttle) setting is raised or lowered proportionally with the Up-
Shift setting.
The following screens for editing the Shift Points are the same for all Shift Points, except the
selected Shift Point replaces ‘n-n’ in the descriptions that follow.
The MAX MicroTuner will beep and display the message:
SHIFT POINT n-n
MIN----ST----MAX
(n-n is 1-2, 2-3 or 3-4, ST = Stock)
Or…
Superchips
The present Shift Point setting will flash. MAX is approximately 10mph the STOCK setting. MIN
is approximately 10mph below the STOCK setting.
Use ‘<’ to lower the Shift Point, ‘>’ to raise the Shift Point.
Press ‘>’ while MAX is flashing to select the
Superchips Performance Program
setting. Press ‘YES’ to save the desired Shift Point setting.
The MAX MicroTuner will repeat this process for each Shift Point.
Editing the Shift Pressure Option Settings
The Shift Pressure Option allows the user to set each Shift Pressure independently. The
choices are:
•
Use the STOCK setting for the Shift Pressure.
•
Adjust
the
Superchips Performance Program
setting for the Shift Pressure.
The following screens for adjusting the Shift Pressure are the same for all Shift Pressures,
except the selected Shift Pressure replaces ‘n-n’ in the descriptions that follow.
After choosing the shift points you wish to use, the MAX MicroTuner will beep and display the
message:
SHIFT PRESS. n-n
MIN----------MAX
(n-n is 1-2, 2-3 or 3-4)
The present Shift Pressure setting will flash. The vehicle program determines the MAX setting.
MIN is the vehicle’s stock setting. Use ‘<’ to lower the Shift Pressure, ‘>’ to raise the Shift
Pressure. Press ‘>’ while MAX is flashing to select the
Superchips Performance Program
setting. Press ‘YES’ to save the Shift Pressure Custom Option setting. The MAX MicroTuner
will repeat this process for each Shift Pressure.
Editing the FAN Turn-On Temperature Option Setting
The FAN Temperature Turn-On Option allows you to turn on the vehicle’s electric fans at one of
the following temperatures:
Superchips Performance Program,
160
°
, 180
°
or STOCK
The MAX MicroTuner will beep and display the message:
Set FAN Turn On:
xxxxxxx
The present FAN Turn-On Temperature setting is displayed. Use ‘<’ or ‘>’ to change the FAN
Turn-On Temperature setting and ‘YES’ to save the FAN Turn-On Temperature Option setting.
Page 10 of 16
Form 0130M 03/29/07
Superchips Inc
.
Superchips Inc.
1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Editing the Speed Limiter Option Setting
The Speed Limiter option allows the user to set the vehicle Speed Limiter to:
•
Use
the
Superchips Performance Program
raised setting.
•
Use the STOCK setting.
The MAX MicroTuner will beep and display the message:
SPEED LIMITER
Raise or Stock
The current Speed Limiter setting will flash. Use ‘<’ or ‘>’ to change the setting and ‘YES’ to
save the Speed Limiter Custom Option setting.
8. Viewing
the
Option Settings
The MAX MicroTuner will beep and display the message:
View Custom Opts?
YES or NO
Press ‘YES’ to view the present values of the Custom Option Settings.
Press ‘NO’ to go directly to the programming process at Step 8 below.
The MAX MicroTuner will beep and display the message:
Press Any Key
to Continue...
Press any key on the MAX MicroTuner keypad. The Custom Options current settings will
be presented in order. Press any key to view the next Custom Option setting.
Press ‘NO’ to continue without viewing the Custom Option Settings.
The MAX MicroTuner will beep and display the message:
Install TUNING?
YES or NO
Press ‘YES’ on the MAX MicroTuner keypad to continue with the Programming process at
Step 8 below.
Press ‘NO’ to stop the process. The MAX MicroTuner will beep and display the message:
Finished with
Tuner? YES / NO
Press ‘NO’ to start over at
Selecting Tune Vehicle / Diagnostics
at Step 2 .
Press ‘YES’ to go to the
End of Programming Sequence
at Step 9 below.
9. Programming
Section
The MAX MicroTuner will beep and display the message:
Turn Ignition
OFF Press >
Turn the ignition to the OFF position and press the ‘>’ key on the keypad. The MAX
MicroTuner will beep and blink the following message:
Initialization..
Please Wait…
After initialization is complete, the MAX MicroTuner will beep and display the message:
Turn Ignition ON
Do NOT START Eng
