USER INSTRUCTIONS FOR SUPERCLENS STEAM ‘N’ VAC CLEANING MACHINE
Step 1
Release grips and remove transparent cover
Step 2
Remove Waste tank and fill to the minimum mark.
Then replace waste tank and transparent cover and
lock into place.
Step 3
Open filling point, insert funnel and fill the boiler with
cold water.(max 1.4L)Then close filling point.
Step 4
Open the front panel and connect the steam hose
Step 5
Plug the power cable into a suitable electrical socket
Press the on/off switch to on at the back of the
machine.
4. FINISHING OFF
1. Switch off machine and unplug the Steam ‘n’ vac; allow it to cool before disassembly and cleaning
2. Disconnect any accessories connected to the pistol grip.
3.
Please rinse and dry any accessories used before packing in their accessory bag.
4. Clean the machine by emptying and rinsing the grey waste tank and transparent cover..
5. Replace the waste tank and transparent cover and lock clamps
Step 6
Press the Steam footswitch once, the amber light will start to flash.After
approximately 10 minutes the amber light will stop flashing . (during use
it is normal for the amber light to flash). Once the amber light stops
flashing, this indicates that the steam has reached its operating pressure.
Step 7
Turn the steam pressure to the required setting. Refer to the cleaning
guide for settings.
Step 8
Select required accessory and push firmly onto the pistol grip.
Step 9
Activate steam function by pressing and holding the steam symbol on
pistol grip trigger until the indicator light comes on. Steam can then be
released by depressing the trigger.
Step 10
Activate vacuum extraction by pressing the
vacuum footswitch and pressing the vacuum
symbol on the pistol grip (Fig 10a).You can
increase/decrease the vacuum power by holding
your thumb on this switch.
Fig 1
Fig 2
Fig 3
2. GETTING STARTED
1. SAFETY
- IMPORTANT - Please read before use
Thismachinedelivershotsteamathighpressurethroughthehandleanditsaccessories.DONOTallowsteamtocomeintocontactwithbareskin.
NEVERaimthesteamdirectlyatpeopleoranimalsorelectricalsockets.Donotuseittocleanthemachineitself.Alwaysuseprotectivegogglesand/or
gloveswherenecessary.Neverputdetergentsorfragrancesintheboiler.
Before use carry out a visual inspection of the machine. Make sure the flex and plug are undamaged. Check the body of the machine for damage. If there is any damage
DO NOT use the machine; contact the store for a replacement.
Familiarise yourself with this machines operation before use, and use safety goggles and gloves, if operating in confined spaces or cleaning overhead surfaces.
Never aim the steam at electrical installations. Only clean electrical machines where this is allowed by the manufacturer.
When carrying out a function check direct the steam nozzle away from yourself. (Check all accessories are present in your Steam’n’vac kit. if they are damaged return
to store).
The machine must only be used in the horizontal position, with all three wheels on a solid flat surface.
Do not allow the cable to come in contact with any surface or objects that could damage it.
The machine has parts that heat up when in use, please exercise caution when using the machine. Never allow children near the machine when in use.
Never leave the machine unattended when it is plugged in. When the machine is not in use; disconnect it from the mains.
Always turn off the steam by the button on the trigger before fitting or changing tools. Ensure the tool has cooled down before handling.
Keep the machine above freezing temperature and do not use boiling water on the machine. Never put the machine in water.
Allow the machine to cool down before handling.
Always prime the waste tank with cold water as this acts as a filter.
Pressurizedsteamisaveryeffectivecleaningmedium;alwaysperformacolourfasttestinaninconspicuousareaonfabrics.Ifyouareinanydoubt
aboutcleaninganymaterialorsubstratealwayscheckwiththemanufacturerfirst.
REMEMBER PLEASE CLEAN THE MACHINE BEFORE RETURNING IT THE STORE.
HELP LINE - If at any time you have any problems or queries with the operation of the machine please ring 0113 200 8220 or go to www.clantex.co.uk
If you had a good experience with Superclens products tell your friends if not tell us on 0113 200 8220
Fig 4
Fig 5
Fig 6
Fig 7
Fig 8
Fig 9
Fig. 10
Steam
Footswitch
Steam Pressure
Vacuum
Footswitch
Fig 10a
Running out of water for steam cleaning
- When the red light on steam footswitch comes on simply repeat step 3. The machine does not
need to be turned off and you can recommence steaming immediately
Waste bucket full
- Check the waste bucket at regular intervals and empty as necessary following steps 1 and 2 above ensuring that the
machine has been switched off first. If the waste bucket reaches maximum fill an audible alarm will sound and the vacuum will cut out.
Empty the waste bucket immediately
3. CLEANING GUIDE (please turn over)
On/off
switch
