If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
1.
Remove the lid from the SuperPonic 8 system and set it aside for now.
Notice the channels located on the rim of the reservoir (image a). These
channels will be for the placement of your Air Pump Tubing and Water
Pump power cord.
AIR PUMP AND AIR STONES
2.
Locate the two gray Air Stones included in your shipment. Place the Air
Stones at the bottom of the SuperPonics reservoir (image b).
Note: the
airtstones have a male end that will fit in the black Air Pump tubing.
3.
Connect the Air Pump tubing to the end of the airstones. Arrange the
tubing into the channels located on rim of the reservoir (image c).
4.
Locate the Air Pump included in your shipment (image d).
THIS PUMP SHOULD NEVER BE PLACED IN WATER
5.
Locate the black tubing from the Air Stones and connect the open end to
the metallic outputs located on the Air Pump (image e).
6.
Now we can run our Air Pump power cord through the lower opening in the
back of the cabinet.
SuperPonic 8 System Assembly
Your plant roots need and love oxygen! It is extremely important
to the health of the plants that you keep your Air Pump and Air
Stones running at all times when the system is in use.
SUPER GROW TIP:
NOTE:
a
b
c
d
e
