background image

4

WARNING

- Before using, read this manual to ensure correct usage and operation. After reading, store in a safe place for future

reference. Incorrect handling of this robot could result in personal injury or physical damage. The manufacturer assumes no

responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this product.

SAFETY GUIDE

Thank you for purchasing this product!

This symbol indicates an additional warning (including caution).

The content will be clearly indicated in an illustration or nearby.

This symbol indicates a prohibited action. The content will be

clearly indicated in an illustration or nearby.

NOTE

- The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without express written authority.

Safety Precautions

Do not operate the robot if it isn’t working properly.

If you notice something unusual when operating the robot, immediately stop operating it and turn the unit off. Contact our

technicians at info@sdrobots.com and explain the issue. Unusual can include things such as smoke, strange odor, damage to

the chassis or components etc.

Be careful when operating around children and animals

Children and animals may not understand that the robot has moving parts. Exercise caution when operating the robot and

remain aware of your surroundings.

Do not expose interior to liquid or insert foreign objects

1. Do not place the robot near water while interior is exposed (ex. flooded area, bathroom etc.).
2. Do not insert any foreign objects into the robot.
3. Avoid placing the robot into a container/bag/case that contains objects besides it’s own components.

Be careful when interacting with internal components of the robot.

The robot contains moving and electric components. Modification and/or disassembly of the robot could result in personal

injury.

ALWAYS

disconnect the power before working on the robot.

Do not drop, throw, or otherwise cause an impact to the robot

The robot contains moving components, wiring, and electrical systems.

If the robot is dropped or otherwise receives an impact, internal components could be damaged. If the robot is dropped or

otherwise falls and is damaged, turn it off immediately.

Pinching hazard

The treaded systems have very powerful motors. The treaded design presents many pinch points! If fingers or hands are inside

the treaded section and the motors energize, injury may occur.

Summary of Contents for WC1500-DM6









Reviews: