MINIMUS w/ MAXVISION
HEADLAMP
SOS FEATURE
• Depress and hold the push On/Off button for
4 seconds when the Minimus is off or activated.
Depress the On/Off button to turn Off SOS mode.
(Fig. 7).
LIGHT ANGLE ADJUSTMENT
The battery housing can be used to adjust the angle
of light up or down 90 degrees (Fig. 8).
LIGHT OPERATION
TURNING ON
• Press the On/Off button to activate. Rotate the
output adjustment dial in either direction to
select one of 13 light output settings. (Fig. 5)
• To achieve maximum output rotate knob
clockwise in a rapid movement. Likewise to
achieve low level output rotate counterclockwise
in a rapid movement.
TURNING OFF
• Press the On/Off button to turn off the light.
(Fig. 6)
WE DIDN’T REINVENT THE WHEEL.
JUST THE HEADLAMP.
Search & rescue, SWAT, military special operations,
and other demanding customers depend on our
world-class illumination tools with their very lives.
Which is why our engineers created Minimus head-
lamps—no-compromise LED headlamps designed
for exceptional performance and all-night comfort in
extreme conditions. It’s what you’d expect from Sure-
Fire—maker of the world’s finest illumination tools.
CONTENTS
Headlamp assembly
Headband
Breathe-O-Prene
®
pad
One SF123A lithium battery
One battery end cap
HEADBAND ADJUSTMENT
1. Move buckle towards back of head to tighten
and move buckle towards lamp to loosen (Fig. 1).
HEADBAND MAINTENANCE
ATTACHING AND REMOVING THE HEADBAND
1.
Stretch headband strap with fingers to make it
firmer, thinner, and easier to insert (Fig. 2).
Slide end of headband into side headband mounting
slot on side where battery end cap is located (Fig. 3).
2. Slide other end of headband strap through
opposite headband mounting slot.
Note: Do not
bend or manipulate slot arm(s).This could cause
breakage and void your warranty.
3. Affix Breathe-O-Prene pad to back of light
assembly.
4. To remove headband, reverse process outlined
above.
BATTERY INSTALLATION/REPLACEMENT
1. Unscrew battery end cap by turning counter
clockwise while holding leash.
2. Insert 123A lithium battery into battery compart
ment in light housing, positive (+) terminal first,
as shown in Fig. 3. Dispose of depleted battery
(if replacing) properly.
3. Turn battery end cap clockwise, until hand tight,
while holding leash.
(Fig. 2)
(Fig. 3)
(Fig. 1)
(Fig. 4)
(Fig. 5)
(Fig. 7)
(Fig. 8)
(Fig. 6)
