background image

31

WARRANTY AND LIMITATION OF LIABILITY

Superior Electric (the "Company"), Bristol, Connecticut, warrants to the first end user
purchaser (the "purchaser") of equipment  manufactured by the Company that such
equipment, if new, unused and in original unopened cartons at the time of purchase, will
be free from defects in material and workmanship under normal use and service for a
period of one year from date of shipment from the Company's factory or a warehouse of the
Company in the event that the equipment is purchased from the Company or for a period
of one year from the date of shipment from the business establishment of an authorized
distributor of the Company in the event that the equipment is purchased from an authorized
distributor.

THE COMPANY'S OBLIGATION UNDER THIS WARRANTY SHALL BE STRICTLY AND
EXCLUSIVELY LIMITED TO REPAIRING OR REPLACING, AT THE FACTORY OR A
SERVICE CENTER OF THE COMPANY, ANY SUCH EQUIPMENT OR PARTS THEREOF
WHICH AN AUTHORIZED REPRESENTATIVE OF THE COMPANY FINDS TO BE
DEFECTIVE IN MATERIAL OR WORKMANSHIP UNDER NORMAL USE AND SERVICE
WITHIN SUCH PERIOD OF ONE YEAR. THE COMPANY RESERVES THE RIGHT TO
SATISFY SUCH OBLIGATION IN FULL BY REFUNDING THE FULL PURCHASE PRICE
OF ANY SUCH DEFECTIVE EQUIPMENT

. This warranty does not apply to any equipment

which has been tampered with or altered in any way, which has been improperly installed
or which has been subject to misuse, neglect or accident.

THE FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

 and of any other

obligations or liabilities on the part of the Company; and no person is authorized to assume
for the Company any other liability with respect to equipment manufactured by the Com-
pany. The Company shall have no liability with respect to equipment not of its manufacture.

THE COMPANY SHALL HAVE NO LIABILITY WHATSOEVER IN ANY EVENT FOR
PAYMENT OF ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR INJURY TO ANY PERSON OR PROPERTY.

Written authorization to return any equipment or parts thereof must be obtained from the
Company. The Company shall not be responsible for any transportation charges.

IF FOR ANY REASON ANY OF THE FOREGOING PROVISIONS SHALL BE
INEFFECTIVE, THE COMPANY'S LIABILITY FOR DAMAGES ARISING OUT OF ITS
MANUFACTURE OR SALE OF EQUIPMENT, OR USE THEREOF, WHETHER SUCH
LIABILITY IS BASED ON WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY
IN TORT OR OTHERWISE, SHALL NOT IN ANY EVENT EXCEED THE FULL
PURCHASE PRICE OF SUCH EQUIPMENT.

Any action against the Company based upon any liability or obligation arising hereunder
or under any law applicable to the sale of equipment, or the use thereof, must be com-
menced within one year after the cause of such action arises.

Summary of Contents for SLO-SYN SS2000MD4-M

































Reviews: