4
This manual is an installation and operating guide to the SLO-SYN
SS2000MD4-M Translator/Drive. Section 1 gives an overview of the Drive
and its features. Section 2 describes the steps necessary to place the drive
into operation. General wiring guidelines as well as the physical mounting
of the unit and connections to the drive portion are covered in Section 3.
Complete specifications, listed in Section 4, provide easily referenced infor-
mation concerning electrical, mechanical and environmental specifications.
The procedure for setting the motor current level is also covered in this
section.
Torque versus speed characteristics with all appropriate SLO-SYN Stepper
Motors are given in Section 5. Section 6, Troubleshooting, gives procedures
to follow if the Translator/Drive fails to operate properly.
Appendix A provides procedures for troubleshooting electrical interference
problems.
1.2
PRODUCT FEATURES
The SLO-SYN SS2000MD4-M Translator/Drive is a bipolar, adjustable
speed, two-phase PWM drive which uses hybrid power devices. It can be
set to operate a step motor in microstep mode at up to 20,000 microsteps
per revolution. The maximum running speed is 3,000 rpm. To reduce the
chances of electrical noise problems, the control signals are optically isolat-
ed from the drive circuit. Features include:
•
Switch selectable current levels of 1.0 through 3.5 amperes
•
Full short circuit protection (phase-to-phase and phase-to-ground)
•
Undervoltage and transient overvoltage protection
•
Efficient thermal design
•
Optically isolated inputs
•
Windings Off capability
•
Automatic Current Reduction
•
Switch selectable step resolution
•
Compact size
•
Sturdy all-aluminum mounting base
Summary of Contents for SLO-SYN SS2000MD4-M
