CM208W Installation Guide
The CM208W variant is a standard installation type cabinet with (16) 3/8”-16 thread fly-point locations. It
can be used in a free standing design where the subwoofer is placed along a wall or corner or it can be flown
using the fly-points. Eyebolts are not included with this model but are readily available from local hardware
stores. Four suspension points are required for flying however two connection points to the structure can be
used by employing a bridle configuration. 1/8” wire rope is the minimum recommended sizing for the
rigging materials.
The CM208W can be flown either from the top as shown or from the back so that the woofers are facing
downwards. The performance differences will be small between the two options so the venue requirements
can dictate your flying configuration.
Page 7 of 11
