26
27
1
+
mode selection
wheel:
in.mix icon
synchronization/
desynchronization icon
color mode
(only available if in.mix is detected among the spa accessories)
To select the color mode, slide the left wheel up or down until the in.mix icon menu is highlighted in the
middle.
In the color page you can access the following:
• zone selection
• synchronizing zones
• changing colors
• intensity
• on/off
zone selection
To select a zone, turn the right wheel until the
desired icon is highlighted in the middle.
This selection allows you to modify its color.
changing colors
Once a zone has been selected, use the color
wheel to choose the desired color or the rainbow
icon to get changing colors.
on/off
There are two ways to turn in.mix on or off. The
first one is by using the Light icon on the SPA
Screen. The second way is by touching the light
bulb icons located each side of the intensity bar.
synchronizing zones
The synchronization/desynchronization icon
allows you to match the color of the selected zone
with the other zones.
intensity
Located at the bottom of the screen, the slider
allows you to modify the intensity of the color.
zone 3
zone 2
zone 1
off
intensity
on
color wheel
rainbow icon
in.mix functions
1
+
too much water on display
wipe screen
This message appears when too much water is
detected on the touch screen. Simply wipe away
excess water.
installation error messages
Upon connecting the in.k1000+ to your spa system you may see one of two error messages.
Please follow the instructions in the message or contact your dealer for more information.
Error messages on-screen list and definitions:
http://geckokeypads.com/k1000errormessages/
9919-101601-A
Rev. 01-2019
www.geckoalliance.com
© Groupe Gecko Alliance Inc., 2019
All trademarks or registered trademarks are the property of their respective owners.
Printed in Canada
