ENGLISH
FRANÇAIS
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using pneumatic tools, basic
safety precautions should always be followed to
reduce the risk of personal injury.
READ
ALL
INSTRUCTIONS BEFORE USING THIS
TOOL
This tool was designed for installing 3/4” tongue and
groove hardwood flooring. We strongly recommend
that this tool not be modified and /or used for any
application other than that for which it was designed.
If you have any questions relative to its application, do
not use the tool until you have written us and we have
advised you.
SAFETY GLASSES:
To prevent eye injuries, the
tool operator and all persons in the work area
must wear approved safety glassesto ANSIZ87.1
specifications with permanently attached, rigid side
shields.
EAR PROTECTION:
Wear ear protection to
safeguard against possible hearing loss.
DRESS SAFELY.
Protective gloves and non-skid
footwear or safety shoes are recommended while
working with and operating this tool. Do not wear
loose clothing or jewelry. Contain long hair.
USE CLEAN, DRY, REGULATED, COMPRESSED
AIR
at 70 to 90 psi / 488 to 621 kPa / 4.88 to 6.2
bar.
DO NOT CONNECT TOOL
to pressure which
potentially exceeds 200 psi / 1379 kPa / 13.8 bar.
AIR HOSE:
Use only hose that is rated for a
minimum working pressure of 150 psi or 150%
of the maximum system pressure, whichever is
greater. Check that connections are tight..
NEVER USE OXYGEN, CARBON DIOXIDE,
combustible gases or any other bottled gas as a
power source for this tool. Explosion and serious
personal injury could result.
COUPLINGS:
Connect tool to air supply hose with
a 1/4” NPT coupling that removes all pressure from
the tool when the coupling is disconnnected.
DISCONNECT TOOL FROM AIR SUPPLY HOSE
before doing any disassembly, maintenance,
1.
2.
3.
4.
5.
6.
7.
8.
9.
