Superior MONIA Instructions For Installation, Use And Maintenance Manual Download

Page: 21 / 44

H07023380 / DT2000477-03

English

6.0 USE

• Do not use the stove as a cooking appliance.
• Ensure that the room in which the stove is installed is sufﬁ ciently well ventilated (fresh air intake).
• Ensure that all joints in the ﬂ ue are hermetically sealed using a silicone- (not cement-) based sealant which is resistant to temperatures of up to 250ºC
and which shows no sign of deterioration.
• Check (or have checked) regularly that the ﬂ ue is clean.
• Under no circumstances use fuels other than pellets.
• Remove any deposits of unused pellets left by failed ignition before restarting the stove.

During operation some parts of the stove (door, handle, controls, ceramic parts) can reach high temperatures. Take great care and all the
necessary precautions, especially in the presence of children, the elderly or disabled and pets.
Keep any inﬂ ammable object well away from the stove while it is in use (MINIMUM 80 cm from the front panel).
While in use the door must remain closed and the glass must be present and intact. The removal of the protective grille inside the pellet
hopper is strictly prohibited. If replenishing with pellets while the stove is lit, ensure that the bag does not come into contact with any
hot surfaces

DT2011649-00

DT2010035-05

6.1 CONTROL PANEL

DT2011650-00

- The stove is ﬁ tted with a digital control panel, which allows the user to control the various functions.
- When the stove is connected to the electrical system but is not in the operating mode, the actual time (e.g.:

12:30

) appears in the left part of the display,

while the readout

OFF

appears in the right part.

DT2032436-00

The control panel keys and their various functions are listed below. These have been numbered in order to make identiﬁ cation easier.

Key 4

(ON-OFF)

Key 5-6

(adjustment/ selection)

Key 1-2

(adjustment/ selection)

Used for:
- manual startup and shutdown.
- exit from programming mode.

When the stove is in operation, they can be used:
-to set the power between 1 and 4
In the stove programming stage, they are used:
- to access the programming menu (key 6)
- to scroll the menu programs and the timer-thermostat
- to scroll time meter storage menu (parameter submenu)
When the stove is in operation, they can be used:
- to set the room temperature between 7°C and 30°C
- to read the temperature and actual time (key 1)
In the stove programming stage, they are used:
- to select the language
- to select the day and time for clock settings
- to set the timer-thermostat parameters
- to enable the buzzer
- to set mode display

Key 3 (SET)

Used for:
- conﬁ rmation of the selected menu

Timer functions

The LED lights up if the timer is activated.

Temperature

The LED lights up when the desired temperature is reached.

Remote control reception

The LED lights up if data are received from the remote control (optional)

Programming

The LED lights up when programming is in progress.

Fuel loading

The LED lights up when the fuel-loading auger is in use.