background image

专业防风避震系统

使用说明书

Windscreen System

User Manual

How to solve the wind noise and handling noise is a big 
issue while doing recording at uncontrolled space like 
outdoors or noising air-conditioner. For improving the 
captured sound quality and reducing unwanted noise, 
the WSK-1 windshield kit is accomplished and does an 
excellent job.

WSK-1’s blimp windshield structure offers a good shield 
while you are working indoors, and gives extremely 
effect for the sound you are capturing. It will prevent 
the blowing noise from air conditioner. The included 
windjammer will be installed on the blimp and gives 
great ability to reduce strong wind noise outdoors.

Different length of shotgun microphones can be 
installed in WSK-1, like Superlux CM9HL, E525S/L. 
Convenient rubber handle and shock mount system 
will ensure handling noise will not appear in your 
recording. The 3/8” thread on the handle will allow 
WSK-1 to be installed on a pole or a microphone stand.

All the necessary features are considered in WSK-
1 windshield and shock mount kit for professional 
recording experts, and you may put in a microphone 
, start doing the recording and forget the annoying 
noise. You are ready go!

•  Decreasing unwanted handling and wind noise

•  Accommodates most shotgun microphones 325mm 

in length and 20-22.5mm diameter

•  Built-in suspension system with internal spacing 

guide

•  Lightweight skeleton handle with 3/8” thread mount 

for pole mount

•  Windjammer windshield included, for outdoor use 

Weight:  
Windshield without windjammer: 585 g 
Windjammer: 165 g 
Dimensions(HxWxD): 285 mm x 488 mm x 126 mm

如何解决在户外使用麦克风录音时,面临到不可控
制的风噪声及移动时晃动的噪音呢 ? WSK-1 防风
罩组为你解决此恼人的问题,并提供一个完整的
方案。

WSK-1 的飞船造型风罩形成第一层的防风噪声的
作用,可解决在室内的空调噪声,但在户外,难以
掌握的风声、杂音,就必须要用更有效的防风系统,
而人造毛防风罩,套在飞船造型的结构上,形成更
好的风噪声隔绝能力。

长筒型的飞船造型,能置入不同长度的枪型麦克
风,如 CM9HL, E525S, E525L 等,便利的把手及
内置的防震架,可防止手持的摇晃振动噪声,手把
上并另有 3/8”螺牙,可将防风罩安装在长杆上或
麦克风立架上。

所有的细节都考虑到了,WSK-1 是专业录音人士的
首选,装上麦克风,开始拾取你要的音质,并排除
恼人的风噪声吧 !

• 可大幅降低晃动噪音和风噪

• 容纳长度 325 mm 和直径 19-22mm 的枪形麦

克风

• 内置悬挂系统,可调整间距以适应不同长度之

枪型麦克风

• 好握又轻巧的手柄带 3/8" 螺纹,可安装在长杆

或麦克风架上

• 附有人造毛防风套,提升防风噪的功能

重量 : 
防风罩组 :
 585 公克
人造毛防风罩 : 165 公克
尺寸 ( 高 X 宽 X 深 ): 285 mm x 488 mm x 126 

mm 

Summary of Contents for WSK1









Reviews: