9
The Air Cleaner is shipped complete in one shipping container. Carefully unpack the Air
Cleaner and all loose items from the shipping container.
Styrofoam blocks have been packed inside the unit for protection. REMOVE THESE
BLOCKS (A) Fig. 2 prior to use. To Remove:
1. Disconnect unit from power source.
2. Remove outer filter by lifting up on the bottom and pulling out (Fig. 2A).
3. Remove inner filter by lifting up on the bottom and pulling out (Fig. 2B).
4. Remove Styrofoam blocks (A) Fig. 2C and replace filters.
DO NOT LIFT THE AIR CLEANER BY THE POWER CORD.
Determine whether the Air Cleaner will be used on the floor, on a bench, or hanging
from an overhead support. If the Air Cleaner will be used as a mobile unit, proceed to
“USING THE AIR CLEANER ON A BENCH OR FLOOR SURFACE” section. If the unit will be
ceiling-mounted, proceed to section “MOUNTING THE AIR CLEANER TO A CEILING OR
OVERHEAD SUPPORT.”
IMPORTANT: When determining where to mount the air cleaner, always select a location
where the air flow is unrestricted. Do not locate the unit in a corner or near any heating
or cooling vents.
UNPACKING AND CLEANING
INSTALLATION OPTIONS
Fig. 2A
Fig. 2B
Fig. 2C
A
