7
Setup and Assembly
Unpacking
Open boxes and check for shipping damage.
Report any damage immediately to your
distributor and shipping agent. Do not discard any
shipping material until the Dual Drum Sander is
assembled and running properly.
Compare the contents of your boxes with the
following parts list to make sure all parts are intact.
Any missing parts should be reported to your
distributor.
Read
this
instruction
manual
thoroughly for assembly, maintenance and safety
instructions.
Contents of boxes
Box # 1 Sander & Conveyor Bed Assembly
See Figure 2.
1 Sander and Conveyor Bed Assembly (A)
2 Handle (B)
1 Large Handwheel (C)
1 Small Handwheel (D)
1 Fastener Tool (E)
1 12/14 mm Open Wrench
1 Owner's Manual
1 Hardware Bag, containing:
4 Hex Cap Screws 3/8-16 x 3/4" (F)
4 Flat Washers 3/8” (G)
Box # 2 Enclosed Stand Assembly
See Figure 3.
1 Front Plate with Door – J
1 Rear Plate – K
1 Hinged Bottom Plate – L
2 Stand Sides – M
1 Hardware Bag, containing:
12 Hex Cap Screws, 5/16-18x1/2” (N)
12 Flat Washers, 5/16” (O)
Figure 2 – (Box #1)
Figure 3 – (Box #2)
Summary of Contents for 913003
Page 25: ...25 Exploded View Machine Body Assembly...
Page 29: ...29 Exploded View Drum Head Assembly...
Page 32: ...32 Exploded View Conveyor and Motor Assembly 33 1Ph...
Page 39: ...39 Notes...
