Supermicro 6038R-DE2CR16L User Manual Download

Page: 57 / 72

Chapter 7: BIOS

7-23

7-22

UPER

TORAGE

YSTEM 6038R-DE2CR16L User's Manual

MMIO High Size

Use this item to select the high I/O memory size according to memory-address
mapping for the PCH chip. The options are

256G

, 128G, 512G, and 1024G.

PCI Devices Option ROM Setting

PCI/PCI X/PCIe Slot 1 OPROM//PCI/PCIX/PCIe Slot 2 OPROM//PCI/PCI X/

PCIe Slot 3 OPROM

Select Enabled to enable Option ROM support to boot the computer using a de-

vice installed on the slot specified by the user. The options are Disabled,

Legacy

and EFI.

Onboard SAS Option ROM

Select Enabled to enable Option ROM support to boot the computer using a

SAS device installed on the slot specified by the user. The options are Disabled,

Legacy

and EFI.

Onboard LAN Option ROM Type

Select Legacy to enable Legacy support for the LAN controller for system boot.
The options are

Legacy

and EFI.

Onboard LAN 1 Option ROM/Onboard LAN 2 Option ROM//Onboard LAN 3

Option ROM/Onboard Video Option ROM

Use this feature to select the type of device to be installed in a LAN port specified

by the user for system boot. The default setting for LAN1 Option ROM is

PXE

. The

default settings for LAN2 Option ROM, LAN 3 Option ROM and Onboard Video
Option ROM are

Disabled

VGA Priority

Use this item to select the graphics device to be used as the primary video display
for system boot. The options are

Onboard

and Offboard.

Network Stack

Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-

fied Extensible Firmware Interface) for network stack support. The options are

Enabled and

Disabled

IPv4 PXE Support

Select Enabled to enable IPv4 PXE boot support. The options are Disabled and

Enabled

IPv6 PXE Support

Select Enabled to enable IPv6 PXE boot support. The options are

Disabled

and

Enabled.

Onboard PLX Device

Select Enabled for onboard PLX device support. The options are

Enabled

and

Disabled.



Super IO Configuration

Super IO Chip AST2400



Serial Port 1 Configuration/Serial Port 2 Configuration

Serial Port 1/Serial Port 2

Select Enabled to enable the onboard serial port specified by the user. The options

are

Enabled

and Disabled.

Device Settings

This item displays the base I/O port address and the Interrupt Request address for

a serial port specified by the user. The default setting for Serial Port 1 is IO=3F8h
IRQ=4; for Serial Port 2 is IO=2F8h, IRQ=3.

Change Port 1 Settings/Change Port 2 Settings

This feature specifies the base I/O port address and the Interrupt Request address

of Serial Port 1 or Serial Port 2. Select

Auto

for the BIOS to automatically assign

the base I/O and IRQ address to a serial port specified.

The options for Serial Port 1 are

Auto

, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,

6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).

The options for Serial Port 2 are

Auto

, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4, 5,

6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).

Serial Port 2 Attribute

Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redi-
rection. The options are COM and

SOL