Supermicro AOC-UTG-I2, User Manual

3-1

Chapter 3

Installation

3-1

Before Installation

Before installation, do the following

1.

Power down the system.

2.

Remove the power cord from the wall socket.

3.

Use industry standard anti-static equipment (such as gloves or wrist strap) and/or 
an environment that prevents accidental electrostatic discharge.

4.

Familiarize yourself with the server, motherboard, and/or chassis documentation.

5.

Confirm that your operating system includes the latest updates and hotfixes.

3-2

Hardware Installation

To install the add-on card, do the following:

1.

Remove the server cover and, if necessary, set aside any screws for later use.

2.

Remove the add-on card slot cover. If the case requires a screw, place the screw 
aside for later use.

3.

Position the add-on card in the slot directly over the connector and gently push 
down on both sides of the card until it slides into the PCI connector.

4.

Secure the add-on card to the chassis. If required, use the screw that you previously 
removed.

5.

Attach any necessary internal and external cables to the add-on card (see page v 
for required cables).

6.

Replace the chassis cover.

7.

Plug the power cord into the wall socket and power up the system.

3-3

Windows 2003/2000 Installation

Use the following instructions to install the drivers to a supported Windows Operating 
Systems. The controller comes with a driver on the CD-ROM CDR-NIC.

1.

Run the CDR-NIC.

If you do not have a product CD-ROM, then download drivers from the 

Supermicro 

Support Website

 and transfer them to your system.

2.

The S

UPERMICRO

 window appears.

Click on the computer icon next to the product model.