SC113M Chassis Manual
5-14
Figure 5-11: Removing the Screws at the Top of the Backplane
5-11 Removing the Backplane
The SC113M chassis backplane is located behind the hard drives and in front of
the front system fans. In order to change jumper settings on the backplane, it may
be necessary to remove the backplane from the chassis.
Removing the Backplane from the Chassis
1. Power down and unplug the system from any power source.
2. Disconnect the cabling to the backplane.
3.
Remove the five upper screws at the top of the backplane, indicated by the
arrows below.
4. Lift the backplane up and out of the chassis.
1
4
3