SC846B JBOD Chassis Manual
4-8
4-5 Installing Hard Drives
The drives are mounted in drive carriers to simplify their installation and removal
from the chassis. These carriers also help promote proper airflow for the drive bays.
Caution
: Except for short periods of time, such as swapping hard drives, do not
operate the server with the hard drive bays empty.
Removing Hard Drive Carriers from the Chassis
1. Press the release button on the drive carrier. This extends the drive carrier
handle.
2. Use the handle to pull the drive out of the chassis.
Place the drive carrier on a flat surface such as a desk, table or work bench.
Figure 4-5. Removing a Hard Drive Carrier
2
1