29
Chapter 3: Maintenance and Component Installation
Changing the Power Supply Module (redundant):
6. If you are replacing only one power supply, there is no need to power down the system.
If both power supplies need to be replaced, then a power-down is required and unplug
the AC cord from the module to be replaced.
7. On the back of the module, push the release lever to the right, as illustrated in the
previous illustration.
8. Pull the module out using the handle.
9. Push the new power supply module into the power bay until it clicks. Replace with the
same model.
10. Plug the AC power cord back into the module.
