Chapter 2: Installation into a Rack
18
Figure 2-2. Securing the Left Rail to the Rack
3. Lift the enclosure and slide it into the rack. Use two roundhead screws on each side of
the server to lock it into place.
Figure 2-4. Enclosure Installed
Note:
The figure above is for illustrative purposes only. Always install enclosures at the bottom
of the rack first.
Stability hazard
. The rack stabilizing mechanism must be in place, or the rack must be
bolted to the floor before you slide the unit out for servicing. Failure to stabilize the rack
can cause the rack to tip over.
