SC118G Chassis Manual
5-10
Figure 5-12: Installing the Riser and Expansion Cards in the Bracket
1
4
1
5
1
6
2. Remove the expansion card bracket from the chassis by unscrewing only
those screws inidcated by the screwdriver icon as illustrated on the following
page.
3. Lift the expansion card bracket from the chassis.
4. Install the riser card on the bracket using the two screws provided.
5. Open the latch on the end of the bracket.
6. Install the expansion card by sliding the card into the appropriate slot in the
riser card and then close the bracket latch over the end of it.
7. Install the entire assembly into the appropriate slot on the motherboard.
Screwdriver
Icon
1
2
Summary of Contents for SC118G-R1400B
