SC118G Chassis Manual
5-12
5-6 Installing the Air Shroud
Figure 5-14: Air Shroud
Air shrouds concentrate airflow to maximize fan efficiency. The SC118G chassis air
shroud does not require screws to set it up.
Note: When installilng twin motherboards, the MCP-310-81803-0B air shroud
must be used. This air shroud is sold separately. Information is available on the
Supermicro Web site at http://www.supermicro.com. Installation of the MCP-310-
81803-0B air shroud is identical to the installation of a standard air shroud, which
is described below.
Installing the Air Shroud
1. Position the air shroud in the chassis as illustrated above.
2. Align the notch (A) on the air shroud with the pin (B) on the add-on card
bracket.
3. Slide the pin (B) into the back of the notch (A)
4. Lower the front of the air shroud over the fan tray, sliding the front notches
(C) over the pins on the fan tray (D).
1
A
1
B
1
C
1
D
1
D
Summary of Contents for SC118G-R1400B
