SC216 JBOD Chassis Manual
4-12
4-7 Power Supply
The chassis has two redundant power supplies. The power modules are hot-
swappable, enabling the power supplies to be changed without powering down the
system. These power supplies are auto-switching capable. This enables the power
supply to automatically sense and operate at a 100v to 240v input voltage. An amber
light will be illuminated on the power supply when the power is off. An illuminated
green light indicates that the power supply is operating.
Changing the Power Supply
1. Determine which power supply needs to be replaced and unplug the power
cord to that module.
2. Push the release tab (on the back of the power supply) as illustrated, to release
the power module from the chassis.
3. While holding down the release tab, pull the power supply out using the handle
provided on the power module.
Figure 4-11. Removing the Power Supply
Release Tab
