4-3
Chapter 4: Chassis Setup and Maintenance
4-3 Rotating the Hard Drive Cage
Figure 4-2. Rotating the Hard Drive Cage
In order to access and install components in the chassis interior, it is necessary
to rotate the hard drive cage (B). This will provide sufficient room to install and
configure the chassis components.
Rotating the Hard Drive Cage
1. Power down the system and remove the power cord from the rear of the
power supply. Remove the chassis side cover as described in Section 4-2.
2. Lift the release tab (A).
3. Rotate the hard disk drive cage (B) outward.
Release Tab (A)
HDD Cage (B)
2
2
1
3
