SC732 Chassis Manual
4-6
7. Remove the hard drive from the hard drive carrier.
8. Insert the new hard drive into the hard drive carrier.
9. Insert the hard drive carrier into the hard drive cage, sliding it towards the
back of the the hard drive cage until it clicks into a locked position.
10. If desired, each hard drive carrier may be secured to the exterior of the hard
drive cage using one optional screw.
11. Rotate the hard drive cage 90 degrees inward, returning it to the closed,
operational position in the chassis.
12. Connect the related cables to the hard drives.
13. Plug the power cord back into the power module, replace the chassis cover
and power-up the system.
Figure 4-5. Installing the Hard Drive Carrier into the Hard Drive Cage
1
11
1
9
Optional
Screw
