4-7
Chapter 4: Chassis Setup and Maintenance
Figure 4-6. Removing the 2.5" Hard Drives
1
4
1
5
Thumb Screw
4-5 Removing and Installing 2.5" Hard Drives (Optional)
The SC732 chassis must be powered-down before hard drives can be removed
from the hard drive carriers.
Removing and Installing 2.5" Hard Drives
1. Power down the system and remove the power cord from the rear of the
power supply. Remove the chassis side cover as described in Section 4-2.
2. Loosen the thumb screw securing the 2.5" hard drive cage to the chassis.
3. Disconnect all cables from the hard drive.
4. Slide the 2.5" hard drive cage out of the chassis.
