SC732 Chassis Manual
4-10
Motherboard Installation
Installing the Motherboard
1. Review the documentation that came with your motherboard. Become familiar
with component placement, requirements, precautions, and cable connec-
tions.
2. Power down the system and remove the power cord from the rear of the
power supply. Remove the chassis side cover as described in Section 4-2.
3. Rotate the hard drive cage 90 degrees outward, as described in the previous
section, Rotating the Hard Drive Cage.
4. Lay the motherboard in the chassis.
5. Secure the motherboard to the chassis using the rounded, Phillips head
screws provided. Do not exceed eight pounds of torque when tightening down
the motherboard.
6. Secure the CPU(s), heatsinks, and other components to the motherboard as
described in the motherboard documentation.
7. Connect the cables between the motherboard and power supply.
8. Plug the power cord back into the power module, replace the chassis cover
and power-up the system.
Figure 4-9. Installing the Motherboard
