5-21
Chapter 5: Chassis Setup and Maintenance
5-7 Installing the Air Shroud
Figure 5-21: Air Shroud
Air shrouds concentrate airflow to maximize fan efficiency. The SC745 chassis air
shroud does not require screws to set up.
NOTE: The air shroud includes tabs that can be removed if motherboard compo-
nents prevent the air shroud from fitting securely. Remove tabs only if necessary.
Installing the Air Shroud
1. Power down the system and remove the power cords from the rear of the
power supplies. Open the chassis cover as described in Section 5-3.
2. Place air shroud in your chassis with the fan side touching the edge of the
two fans closest to the power supply. The other side should cover both the
rear fans.
3. Replace the chassis cover.
Removable Tabs
