6-7
Chapter 6: Rack Installation
Figure 6-3: Installing the Inner Rack Rails
Installing the Chassis Handles and Inner Rails
1. Locate the two chassis handles and six handle screws.
2. Align the chassis handle with the front of the chassis and secure with the
three chassis handle screws.
3. Repeats steps 1 and 2 with the other handle.
4. Locate the two inner rails and twelve screws in the shipping package.
5.
Align the inner rails against the chassis, as shown. Confirm that the rails are
flushed against the edge of the chassis.
6. Tighten the screws. Do not over tighten.
7. Repeat steps 5 and 6 with the remaining inner rail.
