102
Supermicro SC747 Chassis User's Manual
Removing Hard Drive Carriers from the Mobile Rack
1. Push the release button on the hard drive carrier, which will extend the drive handle.
D.14 Installation Procedures
Use the following installation procedures to set up the mobile rack.
WARNING!
SAS IDs are assigned automatically by the backplane. Do not set ID's manually
on the drives. SAS termination is enabled by default on the SAS backplane.
Removing Hard Drive Carriers from the Mobile Rack
The hard drives of the M35T1 mobile rack are mounted in drive carriers to simplify their
installation and removal from the chassis. These carriers also help to promote proper airflow
within the mobile rack drive bays.
Figure D-3. Hard Drive Carrier Release Button
Release Button