104
Supermicro SC747 Chassis User's Manual
Installing a Hard Drive into a Hard Drive Carrier
1. Remove the two screws holding securing the dummy drive to the hard drive carrier.
2. Remove the dummy drive from the hard drive carrier.
Figure D-6. Removing the Dummy Drive from a Hard Drive Carrier
1
1
1
1
1
2
3. Install a new hard drive into the hard drive carrier with the printed circuit board side
facing downward so that the mounting holes in the hard drive align with those in the
hard drive carrier.
4. Secure the hard drive to the hard drive carrier with the six screws provided.
5. Return the hard drive carrier to the mobile rack. Make sure that the hard drive carrier
handle is returned to the closed and locked position. Repeat these steps for each hard
drive to be installed.
Figure D-7. Installing the Hard Drive into a Hard Drive Carrier
Drive Carrier
SATA Hard Drive
1
4
1
4