124
Supermicro SC747 Chassis User's Manual
3. Install a new drive into the carrier with the printed circuit board side facing downward so
that the mounting holes in the drive align with those in the carrier.
4. Secure the hard drive to the carrier with the six screws provided.
5. Return the drive carrier to the mobile rack. Make sure that the drive carrier handle is
returned to the closed and locked position. Repeat these steps for each hard drive you
want to install.
Figure E-10. Installing a Hard Drive
Drive Carrier
SAS/SATA
Hard Drive
1
4
1
4
Warning! Enterprise level hard disk drives are recommended for use in Supermicro chassis
and servers. For information on recommended HDDs, visit the Supermicro website at