26
Supermicro SC747 Chassis User's Manual
3.5 Tower Mounting Instructions
The SC747 chassis is shipped with the chassis cover and feet pre-installed. To use the chassis
as a desktop server, no other installation is required.
Use the instructions in this section if you have converted the chassis for rack use and need
to return the chassis to tower mounting.
Installing the Chassis Cover
Installing the Cover
1. Power down the system and remove the power cords from the rear of the power
supplies.
2. Remove the rack mount front handles.
3. Align the cover post with the corresponding holes on the top of the chassis and place
the cover on top of the chassis. The cover should overhang approximately one-half inch
over the front of the chassis.
4. Slide the chassis cover toward the rear of the chassis to lock the cover into place.
Figure 3-6. Adding Chassis Feet and Top Cover
Chassis Cover
Chassis Feet
Position for Chassis
Rack Mount Handles