40
Supermicro SC747 Chassis User's Manual
Mobile Rack
Hard Drive
Rails
3.
Pull the first drive release tab and push the drive carrier toward the front of the chassis.
Repeat this for all three tabs.
Hard Drive Rails
Hard Drive Carrier
Figure 4-13. Removing the Hard Drive Rails
Figure 4-14. Adding Hard Drive Rails to a Storage Rack
4. Remove the hard drive carrier rails from the hard drive tray. To do this, you must remove
two screws from each side. Do this for all three hard drive carriers.
5. Install two hard drive rails to the mobile rack. Each individual rail requires two screws.
Also, make sure the arrow on the rail points toward the front of the chassis.
6. Slide the mobile rack into the storage module and chassis.