49
Chapter 4: Chassis Setup and Maintenance
4. Pull the release tab upward.
5. Remove the screw holding the bracket in place and pull the bracket from the chassis.
6. Install your expansion card into the PCI slot bracket and motherboard. To do this,
slide the expansion card (with "L" bracket) into the PCI slot and secure the card to the
motherboard.
7. Push the PCI bracket release tab down until it locks into place with an audible "click".
8. Secure the expansion card with the screw previously removed from the chassis.
9. Repeat this process with each expansion card to be installed into the chassis.
Figure 4-22. Removing the PCI Card Slot Guard