56
Supermicro SC747 Chassis User's Manual
9. Push the top of the fan into the bracket until it clicks into the locked position.
10. Route the wiring through the open latch slot and into the chassis.
11. For cosmetic purposes the plastic latch clip may be reinstalled in the latch slot if
desired. Additionally, the wiring may be routed along the top of the PCI slots and
concealed by closing the latch of each slot over the wiring.
12. Plug the fan power connector at the end of the fan wiring into the motherboard.
13. Close the chassis, reconnect the power cord and power up the server.
Figure 4-29. Placing the External Rear Fan and Bracket on the Chassis
Figure 4-30. Routing the Fan Wiring Into the Chassis
Phillips Head
Mounting Screws
1
10