5-15
Chapter 5: Chassis Setup and Maintenance
Expansion Card PCI Slot Setup
SC825:
The chassis includes PCI slots for expansion cards. The number of cards
you can use depends on your chassis model.
SC825 LP:
Provides seven low-profile PCI slots.
SC825U and SC825W:
Provides four full-height/full-length and three low-profile PCI
slots through a user defined universal expansion card.
SC825B2-W:
Provides four full-height/full-length and three low-profile PCI slots
through a user defined universal expansion card.
Figure 5-15. SC825 LP model
PCI Slot Setup in LP (Low-Profile) Chassis
SC825 chassis include PCI slots for expansion cards. The number of cards you can
use depends on your chassis model and motherboard model.
Installing Expansion cards in SC825LP (Low-Profile) Chassis
1. Power down the system and remove the power cords from the rear of the
power supply. Open the chassis cover as described in Section 5-3.
2.
Remove the screw holding the cover in place for each low-profile PCI slot you
want to use. Keep this screw for later use.
3. Connect the expansion cards to the mother board.
4. Secure each card to the chassis using the card's L bracket and the screw
previously removed.
PCI Slots