5-5
Chapter 6: Rack Installation
Figure 5-2. Identifying the Sections of the Rack Rails
(right side rail shown)
Installing the Inner Rails
Place the inner rack extensions on the side of the chassis aligning the hooks
of the chassis with the rail extension holes. Make sure the extension faces
"outward" just like the pre-attached inner rail.
Slide the extension toward the front of the chassis.
Secure the chassis with 2 screws as illustrated. Repeat steps for the other
inner rail extension.
1.
2.
3.
The Inner Rail Extension
The inner rails are pre-attached and do not interfere with normal use of the chassis
if you decide not to use a server rack. Attach the inner rail extension to stabilize
the chassis within the rack. If you are not using a rack, you do not have to install
the inner rail extensions.
2
1
Summary of Contents for SC826E1-R800LP
