5-5
Chapter 5: Rack Installation
Replacing the Inner Rails:
Power down and unplug the chassis. It is also recommended that you remove
1.
the power plug from the chassis.
On a solid, stable surface, lay the chassis on its side.
2.
The inner rail is held in place by one screw near the rear of the chassis.
3.
Remove this screw.
Remove the inner rail by sliding the rail toward the rear of the chassis.
4.
Place the new rail on the chassis, aligning the chassis hooks with the rails.
5.
Slide the rail toward the front of the chassis.
6.
Secure the rail with one screw.
7.
Repeat these steps for the other inner rail.
8.
