5-9
Chapter 5 Chassis Setup and Maintenance
5-4 Installing an I/O Shield
Installing an I/O Shield
I/O shields help to hold the motherboard ports in place. Install the I/O shield that
came with your motherboard before installing the motherboard.
1. Power down the system and remove the power cord from the rear of the
power supply. Remove the cords from both power supplies if your chassis
includes a redundant power module. Remove the chassis cover as described
in Section 5-2.
2. Locate the I/O shield that came with the motherboard.
3.
Push the I/O shield gently into the rear opening of the chassis, until it clicks
into the secure position.
Figure 5-8. Motherboard I/O Shield (Example)
