D-1
Appendix D: BPN-SAS-846EL Backplane Specifications
Appendix D
BPN-SAS-846EL Backplane Specifications
Safety Guidelines
To avoid personal injury and property damage, carefully follow all the safety
steps listed below when accessing your system or handling the compo-
nents.
D-1 ESD Safety Guidelines
Electriostatic Discharge (ESD) can damage electronic com ponents. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufficient to protect your equipment from ESD.
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing a component from the antistatic
•
bag.
Handle the RAID card by its edges only; do not touch its components, peripheral
•
chips, memory modules or gold contacts.
When handling chips or modules, avoid touching their pins.
•
Put the card and peripherals back into their antistatic bags when not in use.
•
D-2 General Safety Guidelines
Always disconnect power cables before installing or removing any components
•
from the computer, including the backplane.
Disconnect the power cable before installing or removing any cables from the
•
backplane.
Make sure that the backplane is securely and properly installed on the mother-
•
board to prevent damage to the system due to power shortage.
