13
Chapter 2 Maintenance and Component Installation
2.2 Accessing the System
The SCE300 features a removable top cover to access to the inside of the chassis.
Removing the Top Cover
1. Power down the system as described in section 2.1.
2. Remove the two screws that hold the cover in place.
3. Slide the cover sideways as illustrated above to release the front and rear cover hooks
from the chassis.
4.
Lift the cover up and off the chassis.
Caution:
Except for short periods of time, do
not
operate the server without the cover in
place. The chassis cover must be in place to allow proper airflow and prevent overheating
.
Figure 2-1. Removing the Chassis Cover
2
3
