60
Chapter 5: Chassis Management Module
Configuring the CMM in Windows OS:
1.
Go to
Start > Control Panel > Network Connections
.
2. Right-click on
LAN
to
View Properties
.
3. On the
General
tab page, choose “Internet Protocol (TCP/IP)” and click
Properties
.
Figure 5-3. Configuring CMM, Choose Protocol
4. Manually configure the IP address of the computer system to be in the same address
range as the CMM (see Figure 5-4).
Example:
IP address: https://192.168.100.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.100.1
1.
Connect network cable to the network port at CMM. The default IP of the CMM is
https://192.168.100.100.
2. Configure the connected computer to the same address range, such as
https://192.168.100.101. The default mode is the Fail Over mode. If the DHCP fails, then
the CMM will automatically default to the IP address of the CMM.
