65
Chapter 5: Chassis Management Module
2. In the address field of the browser, enter the IP address that you assigned to the system
and hit the <Enter> key.
3. When the browser makes contact with the CMM, enter your user name and password,
then click
Login
. The Web-based Management Utility Home Page will then display as
shown below.
Note
: Supermicro ships standard products with a unique password for the BMC ADMIN user.
This password can be found on a label on the motherboard. For more information, please refer
to our website at
https://www.supermicro.com/en/support/BMC_Unique_Password
www.supermicro.com/support/BMC_Unique_Password_Guide.pdf
Address Defaults
The CMM default addresses are:
IP Address – Reset to https://192.168.100.100
Gateway Address – Reset to 0.0.0.0
Subnet Mask – Reset to 255.255.255.0
The address can be changed using the Web-based Management Utility.
Home Page
Figure 5-6. Configuring CMM, Web-based Utility
For more information on the Web-based Management Utility, and a description of its controls,
see the
Web-based Management Utility User’s Manual
.
