67
Chapter 6: 200G Switch
6.2 Features
The switch module includes these features.
Figure 1. Front View
Front Features
Feature
Description
ZQSFP+/QSFP56 Ports
Ports accept QSFP56 Direct Attach Cable (DAC) or QSFP56 transceiver modules
Port LED
Each port has a status LED that indicates a port linkup
Reset Button
Reset the switch
Fault LED
Indicates module has either failed POST or has detected an operational fault within
the module
Initiation OK
Indicates module is operational and has passed the POST with no critical fault
Module Fault LED
Module has either failed POST or has detected an operational fault within the
module
Latch Levers
Used to physically install or uninstall the module
UID Button and LED
Unit ID LED indicator can be activated using the button or the CMM interface
ZQSFP+/QSFP56
Ports
Latch Lever
Initiation
OK LED
UID Button
and LED
Reset Button
Port LED
Fault LED
