3-2
AOC-CTG-i1S Add-on Card User's Guide
3-2 Add-On Card Brackets
The add-on card ships with a PCB bracket that is pre-installed at the factory. For
1U systems, an I/O bracket is also pre-installed on the card. For 2U systems, the
I\O bracket is bundled with the card and must be installed by the customer. See
the drawings below for bracket details.
BKT-0056L (Factory installed
MicroLP PCB bracket)
BKT-0057L (Factory
installed I/O bracket)
BKT-0058L (Customer installed
I/O bracket for 2U system)
For 2U System
For 1U System
3-3 Before Installation
To install the add-on card properly, be sure to follow the instructions below.
1. Power down the system.
2. Remove the power cord from the wall socket.
3. Use industry standard anti-static equipment (such as gloves or wrist strap)
and follow the instructions listed on Page 3-1 to avoid damage caused by
ESD.
4. Familiarize yourself with the server, motherboard, and/or chassis documenta-
tion.
5.
Confirm that your operating system includes the latest updates and hotfixes.
