2-1
Chapter 2: System Safety
Chapter 2
System Safety
2-1 Overview
This chapter provides a quick setup checklist to get your chassis up and running.
Following the steps in the order given should enable you to have your chassis set up
and operational within a minimal amount of time. This quick setup assumes that you
are an experienced technician, famailiar with common concepts and terminology.
2-2 Warnings and Precautions
You should inspect the box the chassis was shipped in and note if it was damaged
in any way. If the chassis itself shows damage, file a damage claim with carrier
who delivered your system.
Avoid areas where heat, electrical noise and electromagnetic fields are generated.
Position the chassis near at least one grounded power outlet.
2-3 Preparing for Setup
The SC732 chassis contains many features that are unique to the SC732 chassis
model. Read this manual in its entirety before beginning installation procedures.
2-4 Electrical Safety Precautions
Basic electrical safety precautions should be followed to protect yourself from harm
and the SC732 from damage:
Be aware of the locations of the power on/off switch on the chassis as well
•
as the room’s emergency power-off switch, disconnection switch or electrical
outlet. If an electrical accident occurs, you can then quickly remove power from
the system.
Do not work alone when working with high-voltage components.
•
Power should always be disconnected from the system when removing or in-
•
stalling main system components, such as the serverboard, memory modules
and optical device drives. When disconnecting the power, you should first power
Summary of Contents for Supero SC732 Series
Page 6: ...SC732 Chassis Manual vi Notes ...
Page 20: ...SC732 Chassis Manual 3 6 Notes ...
